Stainless Bimini and Miscellaneous Fittings.

Stainless Bimini and Miscellaneous Fittings.



316 Stainless Steel Bimini and Miscellaneous Fittings. Usually Out for Next Day Delivery, 1:30pm Work Day Cut-Off.





316 Stainless Bimini Fittings are Supplied to England Scotland Wales and Northern Ireland Uk Only


Stainless Bimini Fork Base Mount with Screw.

Stainless Bimini Fork Base Mount with Screw.

Stainless Bimini Fork Base Mount with Screw.
Pivot Fork Mount 165 Degrees to take Standard End Eye.
Rubberized Base Insert Acting as Anti-Rattle & Damper.
It Accepts End with Eye 4666101 & 4666103
Base size 70 x 25mm. Hole centres 52mm.
Polished 316 Stainless Steel.


(Reference 4666500A)
More Information

✔ 10 in stock
If More than 10 Required?


£10.15 inc VAT


Stainless Bimini Fork Base Mount with Pin.

Stainless Bimini Fork Base Mount with Pin.

Stainless Bimini Fork Base Mount with Pin.
Pivot Fork Mount 180 Degrees to take Standard End Eye. Plastic gasket at Deck Deck Base Acting as Anti-Rattle & Damper.
Base size 70 x 25mm. Hole centres 50mm.
Fixings, Use M6 or No:14 Csk Screws
Polished 316 Stainless Boats Tube Rail Fitting.


(Reference 4666500)
More Information

✔ 6 in stock
If More than 6 Required?


£19.22 inc VAT


Base Deck Mounting with Detachable Fork

Base Deck Mounting with Detachable Fork

Base Deck Mounting with Detachable Fork
8mm Slot that Slants 5 Degrees. 6.35mm Screw.
Height without Fork 17mm, with Fork 53mm.
Base 90 x 39mm. Hole centres 62mm.
Accepts Tube End Eyes Rail Fitting.
316 Stainless Steel.

Requires, Countersunk M5 Machine or No:8 Self-tapers


(Reference 4667000)
More Information

✔ 5 in stock
If More than 5 Required?


£20.78 inc VAT


Stainless 316 Bimini Mounting with Detachable Eye.

Stainless 316 Bimini Mounting with Detachable Eye.

Stainless 316 Bimini Mounting with Detachable Eye.
Hight to Centre of Eye Hole 38mm.
Width 30mm, Length 76mm.
Fixings Hole Centres 41mm.
Use Countersunk M5 or No:10

---DISCOUNTED END OF LINE ---


(Reference 4665322)

✔ 1 in stock
If More than 1 Required?


£19.01 inc VAT


22mm Tubes, Hinged Joint. Closed Ends.

22mm Tubes, Hinged Joint. Closed Ends.

22mm Tubes, Hinged Joint. Closed Ends.
Polished Cast 316 Stainless Steel Boat Tube Rail Fitting.
With a 4.2mm holes for a 4mm Rivet.
Often used on Boat Radar Arches ( A Frame )
For 22mm 7/8 Dia Tube.


(Reference 4633022)

✔ 6 in stock
If More than 6 Required?


£14.98 inc VAT


25mm Tubes, Hinged Joint. Closed Ends.

25mm Tubes, Hinged Joint. Closed Ends.

25mm Tubes, Hinged Joint. Closed Ends.
Polished Cast 316 Stainless Steel Boat Tube Rail Fitting.
With a 4.2mm holes for a 4mm Rivet.
Often used on Boat Radar Arches ( A Frame )
For 25mm Tube.


(Reference 4633025)

✔ 1 in stock
If More than 1 Required?


£18.47 inc VAT


Bimini Deck Mounting Ear with Eye Hole.

Bimini Deck Mounting Ear with Eye Hole.

Bimini Deck Mounting Ear with Eye Hole.
30mm from bottom to centre of the 6.7mm Eye Hole.
Stainless Steel 316.

Requires, Countersunk M5 Machine or No:8 Self-tapers


(Reference 4665222)

✔ 6 in stock
If More than 6 Required?


£8.46 inc VAT


Double Take Off Clamp For 22mm 7/8 Tube.

Double Take Off Clamp For 22mm 7/8 Tube.

Double Take Off Clamp For 22mm 7/8 Tube.
Stainless Steel 304.
To take End Eyes 4666101 or Steel Wire Loop as support line.
Two can be used as a four way support.

>>>END OF LINE<<<


(Reference 9336)

✔ 4 in stock
If More than 4 Required?


£14.29 inc VAT


Stainless Steel 304 Plate 19 x 51 x 3mm Thick.

Stainless Steel 304 Plate 19 x 51 x 3mm Thick.

Stainless Steel 304 Plate 19 x 51 x 3mm Thick.
5mm Hole Centres at 32mm. Can be used with 3726083


(Reference 3726084)

✔ 97 in stock
If More than 97 Required?


£2.10 inc VAT


Stainless Steel 304 Plate 44.5 x 44.5 x 3mm Thick.

Stainless Steel 304 Plate 44.5 x 44.5 x 3mm Thick.

Stainless Steel 304 Plate 44.5 x 44.5 x 3mm Thick.
Countersunk Centres at 32mm, 5mm slot Centres 27 to 42mm.
Can be used with 2 of 3726084 to make a clamp for clamping vertical to horizontal Tube.


(Reference 3726083)

✔ 10 in stock
If More than 10 Required?


£5.38 inc VAT


Stainless Rail Mounting Clamp for 20. 22. 25mm Tube.

Stainless Rail Mounting Clamp for 20. 22. 25mm Tube.

Stainless Rail Mounting Clamp for 20. 22. 25mm Tube.
Polished 316 Stainless Steel. Holes Centres 31.5mm.
One side has 5mm holes that the M5 Machine goes threw and the other side has a M5 thread.

(If Required Thread Side could be drilled out, allowing the Machine Screws to use just the nuts)
Supplied with 2, M5 x 45mm Pan Head Machine Screws & Nuts


(Reference 3726101)

✔ 8 in stock
If More than 8 Required?


£14.32 inc VAT


Nylon Rail Mounting Clamp for 22 and 25mm Tube.

Nylon Rail Mounting Clamp for 22 and 25mm Tube.

Nylon Rail Mounting Clamp for 22 and 25mm Tube.
M5 Machine screw at 30mm centres.
25mm tube 8mm screw projection.
22mm tube 12mm screw projection.
Can be used with 3726083.


(Reference 3717581)

✔ 3 in stock
If More than 3 Required?


£3.82 inc VAT


6mm Stainless Drop Nose Pin with Spring.

6mm Stainless Drop Nose Pin with Spring.

6mm Stainless Drop Nose Pin with Spring.
Working length 17 - 20mm.
To replace screws on Fork Mount & Eyes, Thread may need drilling out.


(Reference 4611631)

✔ 18 in stock
If More than 18 Required?


£3.97 inc VAT


6mm Dia Stainless Drop Nose Pin on Wire Tether.

6mm Dia Stainless Drop Nose Pin on Wire Tether.

6mm Dia Stainless Drop Nose Pin on Wire Tether.
Working length 17 - 20mm.
To replace screws on Fork Mount & Eyes Thread may need drilling out.
As 4611631 but with Wire Tether.


(Reference 4611629)
More Information

✔ 4 in stock
If More than 4 Required?


£5.95 inc VAT


Stainless Sprung Ball Pin on Wire Tether.

Stainless Sprung Ball Pin on Wire Tether.

Stainless Sprung Ball Pin on Wire Tether.
To replace screws on Fork Mount & Eyes Thread may need drilling out.


(Reference 4611630)
More Information

✔ 5 in stock
If More than 5 Required?


£5.40 inc VAT


Bimini Stainless Side Mounting Screw on Plate.

Bimini Stainless Side Mounting Screw on Plate.

Bimini Stainless Side Mounting Screw on Plate.
For all End Eyes. Machine Screw Size (1/4) 6.35mm, Post Height 18mm.
Base 50 x 22mm. Holes centre 37mm.
316 Stainless Steel.


(Reference 4640300)

✔ 10 in stock
If More than 10 Required?


£5.65 inc VAT


Bimini Stainless Side Mounting Screw on Plate.

Bimini Stainless Side Mounting Screw on Plate.

Bimini Stainless Side Mounting Screw on Plate.
For all End Eyes. Machine Screw Size (1/4) 6.35mm, Post Height 18mm.
Base 48 x 73mm. Holes centre 28mm x 53mm.
Polished 316 Stainless Steel.

Fixing with a Csk No:12 Self Tapping or a M6 Machine Screw.


(Reference 4640401_STD)
More Information

✔ 5 in stock
If More than 5 Required?


£10.30 inc VAT


Bimini Stainless Base Fork Mounting.

Bimini Stainless Base Fork Mounting.

Bimini Stainless Base Fork Mounting.
For Tube End Eye.
Machine Screw Size (1/4) 6.35mm at 30mm centre height.
Base Size 55 x 18mm. Fixing Hole Centres 40mm.

For all End Eye, Except HD End Eye 4612221 & 30mm End Eye 4676103
Fixings, Use M5 Csk or No:10 Csk Self Tapper


(Reference 4686104)

✔ 18 in stock
If More than 18 Required?


£10.50 inc VAT


Stainless Tube Fork Mounting. For End Eyes.

Stainless Tube Fork Mounting. For End Eyes.

Stainless Tube Fork Mounting. For End Eyes.
Concave Base for 22, 25 & 30mm Diameter Tube.
Base Size 56 x 22mm Hole centres 41mm.
Polished 316 Stainless Steel Tube Rail Fitting.

Use M5 Csk Machine Screws or 5 x 12mm Stainless Rivet Part No: RIV0512A4


(Reference 4686200)

✔ 7 in stock
If More than 7 Required?


£10.92 inc VAT


M6 x 5mm Socket Set Screw Cone Point A2 Stainless.

M6 x 5mm Socket Set Screw Cone Point A2 Stainless.

M6 x 5mm Socket Set Screw Cone Point A2 Stainless.
Replacement Grub Screw for Most Boat Rail Tube Fittings.
It's handy to have a few spares.


(Reference GS0605A2-P)

✔ 149 in stock
If More than 149 Required?


All prices include VAT
1+
£0.18 each
 
10+
£0.17 each
10 = £1.68
25+
£0.15 each
25 = £3.78


Allen Key Set 1 of 3mm and 1 of 1/8.

Allen Key Set 1 of 3mm and 1 of 1/8.

Allen Key Set 1 of 3mm and 1 of 1/8.
Most of our tube fitting have a M6 x 5mm Socket Set Screw (Grub Screw).
That Take a Allen Key the key size can vary between 1/8 & 3mm


(Reference ALLEN-KIT-01)

✔ 5 in stock
If More than 5 Required?


£2.00 inc VAT

1/8 T Bar Allen Key for Stainless Rail Tube Fittings.

1/8 T Bar Allen Key for Stainless Rail Tube Fittings.

1/8 T Bar Allen Key for Stainless Rail Tube Fittings.
Hexagon Ball Tip with a Firm grip Handle.
Ideal for our stainless tube fittings.


(Reference ZT1011245X)
More Information

✔ 5 in stock


£3.90 inc VAT


3mm T Bar Allen Key for Stainless Rail Tube Fittings.

3mm T Bar Allen Key for Stainless Rail Tube Fittings.

3mm T Bar Allen Key for Stainless Rail Tube Fittings.
With a Firm grip Handle. Ideal for our stainless tube fittings.


(Reference ZT1011221X)
More Information

✔ 5 in stock
If More than 5 Required?


£4.06 inc VAT